Purple Light on Linksys Velop: Troubleshooting Guide
An LED light is present on the top of every Linksys Velop unit. This light shows various colors and purple is one of them. If you are seeing purple light on Linksys Velop, then it means that the router i.e. generally the main node or parent node is ready for setup. Now, the point is that, the purple light occurs in three different states. Walk through the blog to learn about them and respective troubleshooting techniques if needed.
What Does Purple Light on Velop Mean?
Understanding the meaning of the color purple on the Velop light will help you gain deeper knowledge about what to do with respect to a particular situation. Here are the 3 different states of Linksys Velop purple light.
- Solid Purple: When the Velop light is solid purple, it is a sign that the router or your main node is ready for setup.
- Blinking Purple: If you see the node/Velop blinking purple, it indicates that the Linksys Velop setup via Bluetooth is in progress.
- Continuous Solid Purple: When the purple light continues to show up on the node, it means that there is an internet connection error.
How to Fix Linksys Velop Purple Light?
1. Set Up the Router
If you are seeing the blinking purple light on your Velop, then we recommend you wrap up the setup process soon with the help of the Linksys app. Ensure that you do not skip any instruction and create stable connections. Also, do not use wrong details wherever needed. The app version should also be the latest one.
2. Check the Node Placement
In case the purple light on your Velop node continues to glow, it is a sign that you have placed it incorrectly. Perhaps, out of the range of the primary node. With that you might have understood that this placement thing is applicable to the child node. Therefore, ensure that all the child nodes stay in the range of the main node.
3. Take Care of Signal Interference
Another thing you need to take care in regards with the Velop placement is signal interference. There is a high possibility that the location at which you’ve placed the Linksys node is an interference zone. Thus, we advise you check the surroundings of your Velop. If it is found surrounded by devices emitting electromagnetic frequencies and reflexive surfaces, you should change the location right away. After that, see if the purple light goes away or not.
4. Check the LAN Connection
The main node or the master node connects to the modem with the help of an Ethernet cable. It means there is a wired connection between these two devices and the purple light might be due to the weak state of this connection. So, we recommend having a look at the cable connection. On the off-chance, this cable is damaged; you should replace it with a new one immediately. Apart from this, be sure about creating a finger-tight connection.
5. Reset the Velop
It seems that the purple light issue has still not been fixed. No worries! Just perform a factory reset and things will turn in your favor. Therefore, look for the Reset button on the Velop and press it vey carefully. Your node will reset and you will be able to set it up once again.
The Conclusion
Getting the purple light on Linksys Velop fixed is not a very big deal. You just need to take care of a few factors and follow the correct troubleshooting techniques. It is expected that with the help of the knowledge we have provided in the write-up, you will be able to fix the issue easily.
