Extend Your Home Network with Linksys RE7000: Setup & Fixes

This blog will teach you how to extend your home network with Linksys RE7000 extender. Set up your Linksys RE700 WiFi extender and fix common issues encountered during Linksyssmartwifi setup. Linksys RE7000 extender is the best option for large homes where the router does not cover all areas of the home. It boosts the signals of the router and delivers them to the slow network area of ​​our home. Follow all the given steps for the Linksys RE7000 extender setup.

Two Main Methods of Linksys RE7000 Extender Setup

These two are the main methods to set up any Linksys extender; you can use any one of them. Further, we discuss both methods in detail.

1. WPS Button
2. Linksyssmartwifi Setup

WPS Button

This is the recommended method to set up any Linksys or other WiFi extender. If your router has a WPS button, then you should use this method to set it. Further, we provide detailed steps:

1. Position the Linksys RE7000 extender along with the main router.
2. Attach the extender to the power outlet directly.
3. Also, ensure that the router is turned on properly.
4. Hit the WPS button of the router.
5. After some seconds push the WPS button of Linksys RE7000 extender.
6. The extender’s power light starts blinking wait until it turns to solid color.

Once the connection is established, relocate the extender to the place between the router and the slow network area of the home.

Linksyssmartwifi Setup (Manual)

Some old routers do not support the WPS button; in this case, you need to use Linksysamartwifi Setup to connect the Linksys RE7000 extender to the Linksys router. Use any device like a mobile computer or laptop to use this method:

• Make a connection between the Linksys router and the Linksys extender using an Ethernet cable.
• Put the extender.linksys.com into the address bar of a web browser.
• It prompts you to enter login credentials, enter the default login username and password.
• (you can find the default login credentials on the label of the extender)
• Come to the Linksys setup interface and select the option Wireless Range Extender for manual setup.
• Choose the network name of the existing Linksys router and put their password.
• Click on the Connect or Apply button, and your extender will be connected to the router.
• After that set the new SSID and password for Linksys RE7000 extender.

In this method, you can also connect the Linksys extender to the router using an Ethernet cable for a stable connection.

Quick Fixes

If you experience problems during or after completing your Linksys RE7000 extender setup, use these quick troubleshooting tips:

• Power Light Issues: If the power light doesn’t turn solid, try repositioning the extender closer to the router and repeat the WPS or manual setup.
• Connection Problems: Ensure that the default login credentials are accurate and that you’re selecting the correct network during the manual setup. –
• Weak Signal Areas: If certain areas still experience weak signals, consider repositioning your extender or adding another extender to enhance coverage further.
• Restart Your Extender – Restart your Linksys RE7000 extender to resolve minor technical issues.
• Reset – If all fail, then reset your extender to restore its factory default settings. And configure again the extender to the Linksys router again.

Conclusion

The Linksys RE7000 is a great way to fix weak WiFi spots in your home. You can set it up easily using the WPS button or the Linksyssmartwifi setup. Just follow the steps, and if you run into issues, try the quick fixes. With this extender, you’ll get better WiFi in every corner of your house.