How to Fix Linksys Velop Orange Light Issue?

Linksys Velop WiFi system is far advance than the traditional WiFi systems. For small setups single routers are enough to provide the internet connection. But for bigger places, a WiFi mesh system would be an appropriate choice. They have multiple access points which cover the broader area for network coverage. Users sometimes face issues in Linksys Velop setup, to complete the initial configuration you can refer to the Linksys Velop setup guide. Here we are discussing about the major concern that is Linksys Velop Orange Light.

Let’s understand, what does Orange Light on Linksys Velop Mean

If there is some connectivity issue due to poor network then the power LED displays solid orange light. Whereas, if there is some issue within the nodes or between the modem/router and the node then Linksys power LED blinks orange.

Linksys Velop Orange Light Troubleshooting Steps

Let’s go through the tips mentioned below to eradicate the issue of Linksys Velop orange light:

Reducing interference producing physical objects

You should be very careful while placing the Linksys Velop. It should be placed away from the big furniture, thick walls, other electronic devices and water tanks to prevent the network interference. This will help to rectify the connectivity issue which could be the cause of orange light on Linksys Velop.

Appropriate Internet Connectivity

This is quite evident that if there is some problem with the Internet service provider then it will affect the internet connectivity. So, make sure to keep a check on the ISP time to time so as to reduce the chances of network error.

Minimal distance between the Nodes:

Make sure that there should be appropriate distance between the nodes. In addition, this has to be kept in mind that there should not be any point of interference between the nodes. Hindrances can disturb the network connectivity which may result into Linksys Velop Orange light.

Ethernet cable should be in good shape:

It has to be taken care that the Ethernet cable is connected with the connectors from both the end. One end is to be connected with the modem and another with Linksys Velop. There should be no wear and tear in the cable; else it might affect the working of linksyssmartwifi login URL.

Reset Linksys Velop:

When nothing works, it is always advisable to reset or factory reset the Linksys Velop. To perform the same you need to press the reset button on your Linksys Velop, hold it for at least 10 seconds. Once the power LED turn off, release the button. As the reset is complete, LED light on the Velop will turn red first then fades. After blinking it turns into solid red. This process will automatically rectify the temporary glitches in the system hence improves the connectivity.

Updated Firmware:

Older and corrupt version of firmware could be troublesome for Linksys velop. Make it a point to use the upgraded versions of Linksys Velop firmware always.

So, these were some potent reasons behind the Linksys Velop Orange Light. Provided troubleshooting tips will help to resolve the problem efficiently and effectively. If the problem still persists you can speak with the support team anytime.