Linksys RE6400 Setup | RE6400 WiFi Extender Configuration

The Linksys RE6400 extender is one of the dual band wireless range extenders which repeats any router’s signals to provide extended network. Here, we will explain how you can finish the Linksys RE6400 setup with the help of WPS or Linksys extender login interface.

Linksys RE6400 Setup via WPS Connection

The WPS is a way to setup your extender device without using any cable. It is a physical button which is given on the hardware. But, for this connection, the router should have the same WPS button on the hardware or in the interface. So, let’s learn WPS Linksys RE6400 setup.

• Power up your range extender into a working electric outlet close to your router.
• The LED on the front will show blinking amber and then change into solid amber means the extender boots up.
• After turning on the extender, press the WPS button on your home router (which one you want to connect with the extender).
• Now, press the WPS button on your extender and the LED will blink green light.

Now, if the extender front LED turns solid green from the blinking green light, it means the connection is established.

Once the connection is established, you can relocate the extender anywhere between the dead internet zone on your house. To connect any device with the extender, use the host router SSID credentials.

Linksys RE6400 Extender Setup via Web Interface

At first, plug your WiFi extender in a power outlet nearby your router. Then, connect any laptop or computer with the Linksys extender network via SSID or Ethernet cable. Now, use these the steps:

• Go into any web browser and type: 192.168.1.1 or login URL extender.linksys.com.
• Hit ENTER button and get to the Linksys extender setup login page.
• Here, you need to use the Linksys cloud account credentials or if you don’t have any Linksys device use the default admin password: admin.
• Reach the dashboard of the interface and choose the host router network.
• Enter password to connect the router with the extender.
• On the next page, create a new username & password or you can choose the same as router’s SSID credentials.
• Next, adjust all basic settings (IP address, 2.4 GHz wireless setting and 5 GHz wireless settings).

Now, you can SAVE and enjoy new extended network.

Troubleshooting Tips

Relocate to Optimal Spot

After setting up your extender, you must relocate your device to the optimal location in your house. It should be in between the connected WiFi router and dead WiFi zones.

Make Sure There is No Interruption

Electromagnetic waves can disrupt the WiFi signals that coming from your extender or router. Microwave ovens or cordless phones works on these electromagnetic waves. So make sure there is no such device in the same room where you plugged the WiFi extender device.

Reboot the Extender Once in a Month

Rebooting the device refreshes all settings of the device and clears out bugs. To restart the device, you just have to plug the device out (cut the power) and plug it in again (supply power again).

Reset If Any Issue is Not Solving

Resetting your Linksys WiFi extender will delete all data in your device. So make sure you want to reset the device. After the reset, you need to configure the device via Linksys RE6400 login interface on your computer.

• To reset, find the RESET labeled button on the hardware.
• Press and hold it for 10 seconds with the help of pen or pin.
• Release it and initiate the Linksys RE6400 reset process. After the completion, you can re-do the Linksys RE6400 setup.

The Conclusion

Here, you have learned about how to complete the Linksys RE6400 extender setup with the help of the simple to apply instructions. We have also provided troubleshooting tips to solve several problems.

FAQs

1. How to Change RE6400 Extender WiFi Password?

Access the interface with the help of the extender.linksys.com or 192.168.1.1 on your computer. Go into the Settings > Wireless Settings > SSID > enter the WiFi password > SAVE settings. Now, you can use this password to connect the extended network.

2. How to Reset Linksys WiFi Extender (RE6400)?

Find the RESET labeled button on the hardware. Press and hold it for 10 seconds with the help of pen or pin. Release it and initiate the Linksys RE6400 reset process

3. How to Log into the Linksys RE6400 Extender?

Connect any laptop or computer with the Linksys extender network via SSID or Ethernet cable. Go into any web browser and type: 192.168.1.1 or login URL extender.linksys.com. Hit ENTER button and get to the Linksys extender setup login page. Here, you need to use the Linksys cloud account credentials to log into the Linksys extender.