Quick Steps To Follow for Linksys Velop Firmware Update

To enhance the productivity of your device it is very important to update the Linksys velop Firmware. This process of updating helps to rectify the temporary glitches and helps in bug fixing. In turn it saves time in resolving minor issues and amplifies the device performance.

There are basically two ways to update Linksys velop firmware. You can try any out of these two:

• Automatic Linksys velop firmware update
• Manual Linksys velop firmware update

Let’s discuss both in detail

Automatic Linksys velop firmware update:

It has been experienced that Linksys Velop Firmware upgrade automatic process is comparatively easier than the manual one. Steps are as below:

• It is advised that for a stable connection wired computer is required. Else it could disrupt the updating process.
• Use the latest updated web browser, old versions can slow down the process or may not work as well.
• You can now download the Linksys velop firmware for your device as per its version.
• It is advisable to remove any storage device if any. Failure to do so can result in data loss which is unrecoverable.
• Remember to backup configuration.
• You can now update the firmware by click on restart.
• Within couple of minutes, you will get an updated version of Linksys velop firmware
• Once upgrade takes place you can click on done and use your device.

Manual Linksys velop firmware update:

For the manual setup you should have the details with you regarding the model number and version of your Linksys velop firmware. These details can be found on the bottom of the device. Updation steps are as follows:

• Use an updated web browser, in the address toolbar punch in the IP Address “192.168.1.1”. If it does not work, refer to your router’s local IP address.
• Feed in your Linksys velop current admin details (username and password). The default password is admin otherwise.
• Go to Admin > Linksys velop firmware upgrade.
• Browse to find the file you have downloaded and select it to open.
• Continue the upgrade and in the final step turn router OFF/ON.

Resetting the Router:

Once the update is done successfully, it is very much required to reset the device. So, before attempting the same do keep below points in mind:

• Device should be placed in the middle so that it covers the overall area.
• Please be mindful in placing your host and Linksys device close to each other for stronger connection.
• To avoid unnecessary interruption, keep your device away from thick walls, big furniture or water tanks.
• Electromagnetic devices like microwave ovens, radio or TV etc could be the source of interference. So, place your device away for smooth network.

So, this was all about the Linksys velop firmware update process, hope this would help! If you still struggle to update, you can speak with the support team anytime for assistance.