Setting up a Linksys Mesh WiFi system with Starlink

By connecting your Starlink system to a Linksys Mesh router, you can increase the coverage of your network. You can also have consistent, reliable internet connection across your entire house or place of business. You must to buy a Starlink Ethernet adapter in order to accomplish this. This availability is restricted to Starlink customers and is sold only through the Starlink shop.

You must enable Bypass mode on the Starlink app after configuring the Linksys router according to the instructions given below.

Pre-preparatory Measure

Before starting up the setup process, make sure that the Starlink device is appropriately connected with the internet. Download the updated version of Linksys app on your mobile device.

Setting up Starlink System

Starlink router acts as a source of power and bypasses its routing functions completely during this process. To start with the configuration process, first you need to setup the starlink system, follow the steps mentioned below

• Firstly, remove the connected Starlink cable from the Starlink router’s terminal.
• Then, plug in one end of the Ethernet adapter with bottom of the Starlink, this is the same port, where the terminal was connected in above step.
• Now, you have to connect the separated cable from the Starlink router directly with the terminal by making it connect with the Ethernet adapter.
• Then, switch on the power on Linksys router.
• Take an Ethernet cable and connect the Starlink Ethernet adapter and the Linksys router with it. You need to insert the one end to the Internet port of the router and the other to the Ethernet adapter.
• Be sure that your mobile device is not yet linked with the present WiFi network.
• Now go to set up a New WiFi network for ios device or you can click at Launch Setup for the android.
• Click on Velop and Mesh routers.
• If you receive message that Linksys would like to use Bluetooth then opt OK.
• Then you select Next then choose its connected.
• You will notice solid node light when the setup is complete. It is advisable to keep your mobile device and Linksys router close by during the setup process.

Configure the Linksys System

As mentioned earlier, you have to download the Linksys App in you mobile device. Use the Linksys app to guide you through the setup through linksyssmartwifi login page. You have to provide admin credentials like network name (SSID) and password.

To enable mesh functionality, make sure that you include all the nodes during this process if you’re using a Linksys Velop system. For optimal coverage it is advisable to place nodes around your home.

Maximize network settings; be sure that the Linksys router is working in Router Mode only to handle the network traffic. Test your internet connection through the app or by connecting to the new WiFi network.

Now you have learned about the setup process, let’s have a look at the troubleshooting tips as well.

Troubleshooting Hacks

• Check the WiFi Network Coverage: Move around your home with a device like mobile phone which is connected to the WiFi network and ensure the strong signals in key areas. If you want to eradicate the dead zones then place the Linksys nodes accordingly.
• Manage Network Traffic: You can make use of Linksys app to prioritize particular devices or applications like streaming or gaming. Such applications which require stable network should be given preference as compare to other guest unproductive devices.
• Firmware Updates: It is essential to install the latest firmware updates for both Starlink and Linksys systems to intact the network performance. Out dated firmware will degrade the internet compatibility and can be receptive to security hacks.
• Reboot: If you face issues with Linksys system connection issues, make sure that the Ethernet cable is firmly connected and is free from any wear and tear. This rebooting process will rectify the temporary glitches. Double-check that Starlink is in Bypass Mode.

Conclusion

The description shared above about Setting up a Linksys Mesh WiFi system with Starlink will guide you to configure the device at ease.