Linksys Extender IP Address Not Working: Here’s the Fix

The IP address is the unique address assigned to the networking devices which is used to access the settings. The default IP address of a Linksys extender is 192.168.1.1. This address is put in the address field of the browser to access the Linksys extender login page to log in further. But it happens at times that the IP address does not work and won’t let you log in.

We have covered the topmost fixes to resolve the Linksys extender IP address not working problem. You should apply the solutions and eliminate the obstacle so that you can log in to your extender.

Linksys Extender IP Address Not Working: FIXED

Reboot your WiFi extender and then try to log in to your extender using the IP address. The IP address should be entered in the URL field of the web browser. Do not make use of the search bar for the same.

It is also to be ensured that you are not making any typing mistakes in the IP entrée. Confirm this before you hit the Enter key. If the IP still does not work then use the troubleshooting tips given below.

Check the Network Connection

If the Linksys Extender IP address not working there are high chances that you are not connected to the local network. Unlike regular websites, the IP address works only within the local network.

• You should first check that the computer or laptop on which you are trying to access the Linksys IP address is connected to the extender’s network. Making a wired connection will be beneficial as the chances of the network dropping are reduced.
• Secondly check that the network connection is stable. You should verify that the extender is properly connected to the host router.
• Finally, check that the extender receives a consistent power supply and is powered up properly as the fluctuating power supply will result in poor internet connection.

Pro Tip: Make use of an updated internet browser to log in. Also clean the cache, cookies and browsing history from the browser before you log in. Try different browsers to access the IP address.

Use the Right IP Address

Although the default IP address of the Linksys extender is 192.168.1.1, the IP might be changed in order to avoid IP conflict. It so happens that if two devices on the network have the same IP this results in IP conflict. The router assigns a separate IP to the Linksys extender in that scenario. This is the reason why you can’t access 192.168.1.1. You should now check the IP assigned to the extender.

Log in to your router now. Check the DHCP client table. Find the IP address assigned to the Linksys WiFi extender.

Use this IP address to log in to the extender now. It should work without causing you any trouble.

All in All

If the Linksys extender IP address not working and you can’t log in to your extender, then using the solutions listed in this post should help you out. In the event you are still stuck with the login issues then reset the extender with the help of the Reset button located on it. Pressing and holding the button for about 10 seconds will reset the extender to the default values. Now configure the extender once again and give it a new start.