Look for Something Better than Linksys Velop WHW03 Setup                                                   

Linksys Velop WHW03 set up is quite simple and easy process. It can be done in simple and easy by various methods, you just need either a laptop or the mobile device. Follow the steps:

Step1:Unbox

As you receive the device box, unwrap it to find:

• The primary unit
• Additional Nodes
• Power Adapters
• Ethernet Cable
• Quick Start Guide

Step2.Install the Linksys App

You need to download the Linksys App in your smartphone. It can be done through app store if you have an iPhone or from google play store if you are using android.

Step3. Connect the primary device with the Modem

• If your modem is already in running mode then first of all switch it off.
• Now with the use of an Ethernet cable plug in one end with the Velop unit and another end with the modem. Make sure that the Velop WHW03 primary unit is connected with modem’s Ethernet port.
• Make sure to plug in the Velop unit in a smoothly running electrical outlet and connect the power adapter to the Velop WHW03.
• Switch the modem on, power on the velop unit instantly. Pause and wait for the power LED to light up. Once the light stabilises and become solid blue it indicates the firm connection.

Step4. Set up through Linksys App

• To start with open the Linksys velop app in your smartphone.
• You need to create a login and create a Linksys smart WiFi account, if you already have one then simply sign in
• Once you sign in you will be prompted to set up the network, a new WiFi network name (SSID) and password to be emplaced.
• If by any chance you are setting up multiple nodes then you have to sync the nodes and the instructions will be provided by the app itself.

Step5Add Additional Velop Node

• Place the additional nodes in the dead zone areas of your home where you need to improvise the network coverage
• Now, plug each node in the power socket.
• As the power LED turns solid blue which indicates that the unit is ready to connect
• Automatically, app will prompt you to add the nodes and will confirm the firm connection once after the successful addition. You may also receive the guidance from the app regarding the appropriate placement for each node for effective output.

Step6.Final Configuration

• As you are done with the nodes setup, app will further finalize it and even test the WiFi network coverage.
• You can alter the setting as required for instance parental control, firmware update or device prioritisation through the app.

This is all about look for something better than Linksys Velop WHW03 setup , now have a look at the troubleshooting tips as well. Keep these troubleshooting hacks in mind while configuring the device to reduce the chances of error

Troubleshooting Hack

To detect a Velop node, restart your device, ensure Wi-Fi connection during setup, and try moving nodes closer to the main node until the LED turns solid blue.

Reboot the device if required, this will eradicate the temporary glitches in the system.

To Sum UP

Hereby, you must have understood the complete process of look for something better than Linksys Velop WHW03 setup. For further assistance you can connect with the support team anytime.