Linksys Velop Mesh Extender WHW01P Can’t Connect?

What to do when the Linksys Velop mesh extender won’t connect to the Linksys Velop system as child node? Do you have the same query on your mind? We can help you with this. This blog covers an effective workaround for the problem that you are stuck with right now. Read on.

Here we are going to take the Linksys mesh extender model number WHW01P as a reference. The solutions listed ahead can beused for any other model number as well.

Linksys Velop Mesh Extender Won’t Connect as Child Node: Fix

If the child node WHW01P is not connecting to the parent node then you should first of all check that the distance separating the two devices is not more than necessary. Ensure that it is not more than 10 ft. After the nodes connect, you can relocate the child node.

If the distance is ideal and you still come across Linksys Velop node not connecting issue then use the solutions that we have listed ahead.

Begin With This:

• Know that the power supply to the devices is crucial. It is essential that all Linksys Velop nodes are fully booted up and have a consistent power supply to them. Thus check the power adapters and the power outlets thoroughly and mend or replace anything required.
• It is to be made sure that the parent node is already configured before you connect a child node to it. Use the Linksys Velop app or web interface to set up the Linksys Velop system if not yet done. Thereafter you can connect Linksys Velop mesh extender WHW01P to the parent node.
• If using the Linksys Velop app to form the connection then you must make use of the updated app version.
• Verify that the Linksys Velop parent node’s connection with the internet modem is well intact.

Reset Linksys Velop Mesh Extender WHW01P

If the above given tips have not been useful in resolving the trouble, then you should reset the Linksys child node. The child node must have the default settings installed on it while you connect it to the parent node. If it is an old node with other customized settings on it, then you’ll face issues while connecting it. Thus, go for the Linksys mesh extender reset process.

• Press and hold the Reset button on the node and observe the LED behavior.
• The LED turns red and then begins pulsing.
• The pulsing light fades and goes out completely.
• Release the button when the light turns solid red again.

The child node is now reset. Bear in mind that the parent node must not be reset. You should now try to connect the nodes using the app or 5-press setup method.

Update Firmware on Nodes

If the firmware on the parent node and Linksys Velop mesh extender WHW01P is not up-to-date, then also the setup issues appear.

Log in to the Linksys Velop system and check the firmware version. Also, check for available updates and install them on the parent node.

You can also update the firmware in WHW01P by connecting to its default SSID on a computer. As soon as you update the firmware on both nodes, you can easily connect them.

In the End

There are many users who complain that the Linksys Velop Mesh ExtenderWHW01P is not connecting to the parent node. If you are one among them then we expect that using the solutions discussed in this post should be helpful to you.