![Why is My Linksys Velop Not Connecting to Modem?](https://velosetup.com/wp-content/uploads/2023/09/my-linksys-velop-not-connecting-to-modem.jpg)
Why is My Linksys Velop Not Connecting to Modem?
I have been trying to set up my Linksys Velop whole home mesh WiFi system but I can not get the Velop connected to the modem. Please help! There can be instances when you might come across this issue. There are various reasons that may force you to face the connectivity problem. If you can not get the Linksys Velop connected to the modem, then this means there is no internet connection. But you do not have to worry about it. Resolving the issue “Linksys Velop not connecting to modem” is possible. How? Keep on reading ahead.
How to Fix Linksys Velop Not Connecting to Modem Issue?
We hope you are aware of the fact that you need to connect only the primary node with the modem. There is one node which is primary and all other nodes are secondary or child nodes. The secondary nodes are connected to the primary node. If you are trying to connect all other nodes to the modem, then you will face issues.
Now, read the further sections to learn how to fix the problem.
Before Anything Else
Here are some quick fixes that can help in connecting the two devices. Before getting into deep troubleshooting, try them. Who knows they might be helpful to you.
1. Reboot the Node
You should try to restart your Linksys primary node. This will help to rid it of some technical glitches. Turn it off and then turn it on. This completes the reboot process. Try the get the node connected to the modem now.
2. Bring the Devices Near
You should move the Linksys Velop primary node near the modem. An excessive distance could be the reason why they can not communicate and hence are not getting connected. Unplug the node from its current location and then plug it near the modem.
Some More Tips to Fix Linksys Node Connection Issue
Make Hardwired Connection
If the Linksys Velop parent node is not getting wireless signals from the modem, then you can opt for a hardwired connection between the two devices. To get this job executed, you should have handy an Ethernet cable. Use it to join the devices. Use the LAN port on the modem and the Internet port on the node. You should make sure that the cable is in good condition and the established connection is well intact.
Ditch Interference
There is a possibility that you do not have an Ethernet cable to connect the devices using it. In that scenario, you are left with making only the wireless connection.
Signal interference is one of the major reasons why the devices can not get connected to each other wirelessly. The Linksys Velop not connecting to modem could also be due to interference in the signals.
You can verify this by having a look at the location of your Linksys Velop main node and the modem. Do you see other electrical devices or networking devices near it? If yes, then you need to move the node away from them now. Once there is no signal interference, you will be able to get the deivces connected without any hassle.
Power Cycle Whole Network
In the very first step, you rebooted the Linksys Velop node. We now recommend you power cycle the entire network. Maybe it is the modem that is the reason behind the issue. So this time you should include the modem as well in the power cycle process.
Power off the Linksys Velop node and the modem. Unplug the power cables from their respective electrical sockets. Also, remove any other cable like the Ethernet cable that is connected to the devices. Wait for some time. After about 5 -10 minutes, make the connection, Plug the power cables and switch on the modem first, and then the Linksys router or the primary node. The devices should connected easily now. You can now go ahead and access linksyssmartwifi login page to carry out the setup.
Verdict
The aforementioned tips and tricks should help you! In case, you are still struggling with Linksys Velop not connecting to modem issue, then reset your Linksys Velop to the factory settings. There could be some configuration issue that is responsible for the problem at hand. Reset the node and you are good to go.